Draytek 2130 - Manual (Page 168)

Vigor2130 Series User’s Guide 160
Enabled Check here to activate this tunnel.
Name Specify a name for this tunnel.
Remote IP Enter the IP address of the remote host that located at the
other-end of the VPN tunnel.
Type This group of fields is applicable for IPSec Tunnels. Different
type will bring out different requirement of information.
Pre-Shared Key Such field will be applicable when Preshared key is selected as
the Type for the authentication. Input 1-63 characters as
pre-shared key.
Confirm Pre-Shared key Such field will be applicable when Preshared key is selected as
the Type for the authentication. Input 1-63 characters as
pre-shared key again to confirm it.
Local Certificate Such field will be applicable when Certificates is selected as the
Type for the authentication.
Local Identity Local Identity is on behalf of the IP address while identity
authenticating with remote VPN server. The length of the ID is
limited to 47 characters.
Remote Identity This field defines the identity of the remote end.