Draytek 2130 - Manual (Page 187)

Vigor2130 Series User’s Guide 179
Enable (Syslog Access…) Check “Enable” to activate function of syslog.
Router Name Assign a name of this device.
Server IP Address The IP address of the Syslog server.
Destination Port Assign a port for the Syslog protocol.
Log Level Choose the severity level for the system log entry.
Enable (Mail Alert…) Check “Enable” to activate function of mail alert.
SMTP Server The IP address of the SMTP server.
Mail To Assign a mail address for sending mails out.
Mail From Assign a path for receiving the mail from outside.
User Name Type the user name for authentication.
Password Type the password for authentication.
Enable E-mail Alert Check the box of User Login to send alert message to the
e-mail box while the router detecting the item(s) you
specify here.
Click OK to save these settings.
For viewing the Syslog, please do the following:
4. Just set your monitor PC’s IP address in the field of Server IP Address
5. Install the Router Tools in the Utility within provided CD. After installation, click on the
Router Tools>>Syslog from program menu.