Draytek 2130 - Manual (Page 141)

Vigor2130 Series User’s Guide 133
Dest. Port Filter Specify the TCP port destination filter for this ACE.
Any: No TCP destination filter is specified.
Specific: If you want to filter a specific TCP destination
filter with this ACE, you can enter a specific TCP
destination value. A field for entering a TCP destination
value appears.
Range: If you want to filter a specific TCP destination
range filter with this ACE, you can enter a specific TCP
destination range value. A field for entering a TCP
destination port range appears.
Dest. Port No. Type the value if you choose Specific as the Dest. Port
Filter. The allowed range is 0 to 65535. A frame meeting
this ACE matches this TCP source value.
Dest. Port Range Type the value if you choose Range as the Dest. Port Filter.
The allowed range is 0 to 65535. A frame meeting this
ACE matches this TCP source value.
TCP FIN Specify the TCP "No more data from sender" (FIN) value
for this ACE.
0: TCP frames where the FIN field is set must not be able
to match this entry.
1: TCP frames where the FIN field is set must be able to
match this entry.
Any: Any value is allowed.
TCP SYN Specify the TCP "Synchronize sequence numbers" (SYN)
value for this ACE.
0: TCP frames where the SYN field is set must not be able
to match this entry.
1: TCP frames where the SYN field is set must be able to
match this entry.
Any: Any value is allowed.
TCP RST Specify the TCP RST value for this ACE.
0: TCP frames where the RST field is set must not be able
to match this entry.
1: TCP frames where the RST field is set must be able to