Mossberg International SA-2 User Manual
Page 8
8
INSTALLING THE MAGAZINE PLUG
Move the safety button so it is fully protruding out of the right side of the
trigger guard and cannot be moved any further indicating the “ON” (SAFE)
position. Pull back the operating handle. The action should stay opened.
Visually and physically check the chamber, elevator, and magazine tube to
be certain the shotgun is unloaded before installing the magazine plug.
Unscrew and remove the magazine cap. Insert the plastic magazine plug into the
end of the magazine tube. Insert the magazine plug blocker by pushing down on
the slanted end diagonally onto the end of the plastic magazine plug. After the
magazine blocker is in the magazine tube make sure it is sitting flat on the plastic
magazine plug to capture it in the magazine tube. Release pressure from the
magazine plug blocker. Replace the magazine cap finger tight only.
67425 6/2/09 10:56 AM Page 8