MOCET IP3021A - Manual (Page 53)

Page 53
MOCET IP3022 SOHO IP Deskphone User Guide
indicated by a flashing message waiting indicator (MWI) LED on the front of the phone and
an icon( ) shown on display.
 To access local voicemail, please follow the steps below.
1. Input your mailbox ID, the default ID is “117”, and then press Dial soft-key to dial out
and enter local Mailbox.
2. The IVR will ask you to enter your mailbox PIN Code.
3. Input your PIN CODE, the default code is “1234”.
4. Follow the interactive voice response (IVR) instructions to access voice mail
messages.
Mailbox ID and PIN CODE are allowed to be changed. Please follow the steps below to do.
1. Press “Menu”.
2. Select Settings > Basic Settings > Local Voicemail > Mailbox ID/ PIN Code.
Note:
1. The maxima recording duration per message is 25(s).
2. The maxima quantity of messages is 52.
 To access server based voicemail, please follow the steps below.
1. Press the Message ( ) hot key to enter VM Messages.
2. Select a line that you want to access, and then press OK key to confirm and dial out
the access code.
3. Follow the interactive voice response (IVR) instructions to access voice mail
messages.
Server based voicemail is an optional feature configured on a hosted SIP service or IP
PBX and may not be supported on your particular system. To use server based voicemail
on the phone, some settings need to be configured first. For more information, please
contact your administrator or Service Provider support center.
3.18. Placing a Speed Dial Call
To make a speed dial call, you can use either one of the following two methods.
 Make a call from the speed dial list.
1. Pickup the handset, or press a line key, or press the speaker key or press the headset
key.
2. When you hear dial tone, dial the one digit (0-9) speed dial key you previously
configured.