Using the advanced features of your phone, Login to the web interface of the communicator – MOCET IP3092 User Manual
Page 45
Page 45
MOCET IP3092/IP3092L Communicator User Guide
5. Using the Advanced Features of Your
Phone
The
Getting Started chapter describes the steps used to customize the Communicator
from the IP Commander app menus. However, there are many advanced features that
need to be configured using the phone’s web user interface. This chapter provides
instructions on how to use these features.
5.1. Login to the web interface of the Communicator
To use your web browser to configure the Communicator, you need to know the IP
address of the phone on your local area network (LAN). Using the IP Commander app,
press the Information panel and find the IP address (see below)
Enter the correct Username and Password information into the dialog box and press OK.