MOCET IP3092 User Manual

Page 15

Page 15

MOCET IP3092/IP3092L Communicator User Guide

Headset

Press this key to enable or disable the Headset feature; it does
not enable or disable the 3.5mm port or Bluetooth connection.

Volume Rocker

Volume control keys to adjust volume of Handset Receiver,
Handset DTMF output, Handset Ring output, Headset
Receiver, Headset DTMF output, Headset Ring output,
Speakerphone output, Speakerphone DTMF output and
Speakerphone Ring output

There are three Communicator keys that may not function in iPad app mode:

Mute

For supported apps, this key can be used to mute the audio.

Hotline

Function is used in IP Commander app mode for dialing up to
three pre-programmed phone numbers in succession
regardless of whether an iPad is inserted in the Communicator

Home

Function is used in IP Commander app mode to bring IP
Commander to the forefront or launch it if it is not running

1.5.2. Communicator Key Function for IP Commander mode:

If the Communicator is connected to a VoIP service or IP PBX, and the IP Commander app
is to be used, the audio system control in the app should be set to On and to Commander.
The Communicator key functions are shown below:

Key

Description

Hotline

Press this key to make an emergency call whether the iPad is
attached or not; requires subscription to VoIP service or
connection to an IP PBX. A red LED is used to indicate its
status

Home

Press this key to bring the IP Commander app immediately to
the forefront. A blue LED is used to indicate its status

Speakerphone

Press this key to enable or disable the Speakerphone; a blue
LED is used to indicate status

Mute

Press this key to mute a call (the other party will not be able to
hear you).

Headset

Press this key to enable or disable the Headset feature; it does
not enable or disable the 3.5mm port or Bluetooth connection.

Volume Rocker