Luxul XWR-1750 - Manual (Page 8)

8
XWR-1750
a: 14203 Minuteman Drive, Suite 201, Draper, UT 84020-1685 | luxul.com | 801-822-5450
LUX-UG-XWR-1750 Vers: 022515
„
It is recommended that the Grounding connection to the outlet is functioning
properly and the XWR-1750 is positioned away from direct sun light
„
Ensure there is sufficient space around the XWR-1750 for proper ventilation and heat
dissipation. It is recommended to have at least 4-6 inches around all sides.
2.4 XWR-1750 Installation
Before installing the XWR-1750, test the Internet connection to validate that it is
functioning properly. When Internet access has been confirmed, follow the steps below
for Router installation.
1. Connect the Internet cable to the XWR-1750 WAN port
2. Connect one of the XWR-1750 LAN port to a switch, access point, or computer.
3. Connect DC Power Adapter
4. Establish LAN or Wireless Connection
5. Connect a Wireless device to the 2.4GHz or 5GHz Wireless SSID.
NOTE: Connect the included DC power adapter to the XWR-1750 first and
then to the AC outlet.
2.5 Default IP Address
The XWR-1750 default IP address is 192.168.0.1. This address can be changed. However,
for hassle free installation of other plug and play Luxul devices, it is recommended that
the default IP value be maintained.
2.6 Connecting a Client Device
Connect a client device to one of the XWR-1750 LAN ports or to a switch that is
connected to an XWR-1750 LAN port. Connect a wireless client device to one of the
wireless SSIDs (
Luxul17502G or Luxul17505G). The DHCP server on the XWR-1750 is
configured by default. If your client device is set to obtain an address automatically, no
further configuration is required.
2.7 Verifying Connectivity
After automatic configuration of the TCP/IP parameters, the ping command can be used
to check connectivity between the XWR-1750 and the client device.
Windows Devices:
6. Select Start >> Run. Input cmd in the Run line then press enter.