Luxul XWR-1750 - Manual (Page 13)

13
User Guide
© 2015 Luxul. All Rights Reserved.
Other trademarks and registered trademarks are the property of their respective owners
w
Static IP: Allows you to enter the WAN connection IP Address specified
by the ISP.
w
Netmask: Allows you to enter the WAN connection Subnet Mask specified
by the ISP.
w
Gateway: Allows you to enter the WAN connection Gateway IP Address specified
by your ISP.
w
Primary DNS: Allows you to manually configure the Primary DNS Server IP Address
specified by the ISP or any third party DNS Server IP Address. With the Static IP
Connection Type specified, this is a required field.
w
Secondary DNS: Allows you to manually configure the Primary DNS Server IP
Address specified by the ISP or any third party DNS Server IP Address. With the
Static IP Connection Type specified this is a required field.
w
Custom MAC Address: Allows you to set a Custom MAC Address which allows the
Router to appear as a Computer to the ISP Modem. Some Modems will cache the
MAC Address of the first device used to setup Internet Service and cannot be reset
by the user. If this occurs you can clone that setup Device’s MAC Address to allow
the XWR-1750 to connect to the Modem.
w
Custom MTU: Allows you to configure a Custom MTU setting. MTU (or Maximum
Transmission Unit), is the maximum packet size allowed on the network. Some ISPs
(usually DSL or Fiber) will require this value to be set if the Modem is in
Bridge mode.
„
After making any changes to the Connection Type, you must click the Save button
to Save your changes, then you must click the Reboot button for the changes to take
effect. You can click the Save button and proceed to other pages without losing your
configured changes.
3.1.4 Local Network / LAN
Allows you to set the Local Network IP Address of the Router and the Subnet Mask
used in the Local Network.
Select the Menu Quick Setup to view the following page: