Luxul XWR-1750 - Manual (Page 7)

7
User Guide
© 2015 Luxul. All Rights Reserved.
Other trademarks and registered trademarks are the property of their respective owners
NOTE: If additional local ports are required, it is recommended that a Luxul
switch be used in conjunction with the XWR-1750.
2.1.2 Rear Panel
„
Antenna: 3 RPSMA Antenna ports for connecting 2.4/5GHz wireless Antennas.
„
Power: Power port used to connect the provided DC power supply.
„
WAN: 1 WAN RJ-45 Ethernet Port for connecting internet feed.
„
LAN: 4 LAN RJ-45 Ethernet Ports allowing for four local network connections.
„
Reset Button: Used for hard reset or factory default reset. To hard reset the router,
press and release the button. To reset to factory defaults, press and hold this button
for 15 seconds.
CAUTION: Resetting the XWR-1750 to factory defaults will remove all
custom settings
XWR-1750 Rear Panel
2.2 System Requirements
„
Network Connections: 802.3 Ethernet Enabled Computer or 802.11a/b/g/n/ac
Wireless Enabled Computer
„
Web Browsers: Supported Web browser versions include I.E. 9, Firefox 25, Safari 5,
Chrome 30, and up. The Web browser is used to confi gure the XWR-1750.
„
Internet: Broadband Internet Service (depending on the service provider, a separate
modem may be required)
2.3 Installation Requirements
„
Install the XWR-1750 in a stable/safe place to avoid any possible damage
„
Inspect the DC power adapter to ensure that it is correctly connected
and undamaged
„
To avoid electric shock, DO NOT open the XWR-1750 housing (no user serviceable
parts inside). Opening the XWR-1750 will void your warranty.