Luxul XWR-1750 - Manual (Page 31)

31
User Guide
© 2015 Luxul. All Rights Reserved.
Other trademarks and registered trademarks are the property of their respective owners
3.5 Guest Network
This page displays the Guest Network Settings currently configured on the Router.
Select the menu Wireless>>Guest Network to display the following page:
„
Guest SSID: Displays the current Guest Network settings active on the Router.
w
Enable/Disable SSID: Allows you to Enable or Disable the SSID. Disabled is the
default setting.
w
Network Name (SSID): Allows you to specify the Network Name (SSID) used to
identify the Wireless Network to client devices.
w
SSID Broadcast: Allows you to Enable or Disable the SSID Broadcast. Enabled is the
default setting.
w
Security Mode: Allows you to set the desired Security Mode used to con-
nect to the SSID. Supported modes include 64bit/128bit WEP, WPA, WPA2 and
WPA/WPA2 Mixed. Open is the default setting. Adding Security to any SSIDs is
recommended.
w
WEP Key: When selecting WEP Security a WEP key option will appear. This allows
you to set the WEP Key. It can consist of Numbers 0-9 and Letters A-F. For 64bit
WEP, enter 10 hexadecimal digits (0-9 and A-F) or 5 regular characters. For 128bit
WEP, enter 26 hexadecimal digits (0-9 and A-F) or 13 regular characters.
w
Encryption: When selecting WPA or WPA2 security, two new options will appear.
The first is Encryption, which allows you to set the Encryption type used by WPA/
WPA2. Options include AES, TKIP&AES and TKIP. AES is the default and recom-
mended setting.