Xwr-1750 – Luxul XWR-1750 User Manual
Page 14
14
XWR-1750
a: 14203 Minuteman Drive, Suite 201, Draper, UT 84020-1685 | luxul.com | 801-822-5450
LUX-UG-XWR-1750 Vers: 022515
Local Network / LAN: Displays the Local Network IP Options
w
LAN IP Address: Allows you to configure the LAN IP of the Router, this will be used
by all devices in the LAN as the Default Gateway. If you are installing other Luxul
devices, we recommend keeping the default IP of 192.168.0.1.
w
LAN Subnet Mask: Allows you to specify the Subnet Mask to be used in the LAN.
The default value of 255.255.255.0 is recommended unless specified otherwise by
your Network Administrator.
3.1.5 Wireless Settings 2.4GHz Frequency
Allows you to configure the Primary 2.4GHz Wireless Network.
Select the Menu
Quick Setup to view the following page:
Wireless Settings 2.4GHz Frequency: Displays the 2.4GHz Wireless
Network settings.
w
Operating Mode: Allows you to select the Operating Mode of the SSID. Access
Point is the default setting.
w
Network Name (SSID): Allows you to specify the Network Name (SSID) used to
identify the Wireless Network to client devices.
w
Security Mode: Allows you to set the desired Security Mode used to connect to
the SSID, the supported modes include 64bit/128bit WEP, WPA, WPA2 and WPA/
WPA2 Mixed. Open is the default setting, we strongly recommend adding Security
to any SSID.
w
WEP Key: When selecting WEP Security a new option will appear WEP Key. This
allows you to set the WEP Key, it can consist of Numbers 0-9 and Letters A-F. For
64bit WEP enter 10 hexadecimal digits (0-9 and A-F) or 5 regular characters. For
128bit WEP enter 26 hexadecimal digits (0-9 and A-F) or 13 regular characters.
w
Encryption: When selecting WPA or WPA2 security two new options will appear
the first is Encryption. This allows you to set the Encryption type used by WPA/
WPA2 the options include AES, TKIP&AES and TKIP. AES is the default and recom-
mended setting.