Luxul XAP-1230 - Manual (Page 5)

5
User Guide
© 2014 Luxul. All Rights Reserved.
Other trademarks and registered trademarks are the property of their respective owners
1.2 Site Preparation
„
Consult your site survey and network analysis reports to determine
specific equipment placement, power drops, and so on.
„
Assign installation responsibility to the appropriate personnel.
„
Identify and document where all installed components are located.
„
Ensure adequate, dust-free ventilation to all installed equipment.
„
Identify and prepare Ethernet connection.
„
Verify that cable lengths are within the maximum allowable distances
for optimal and certified signal transmission.
2 XAP-1230 SPECIFICATIONS
Standards Compliance 802.11n (300Mbps)
Interface One 10/100/1000M Port
Antenna Two External and Removable 2.4GHz High Performance
Antennas
Button Reset button
Power 802.3at PoE
Dimensions W x H x D in. (mm) 7 (177.8) x 4 (101.6) x 31.25 (31.75)
LEDs Power, LAN/Link Activity, WLAN, Bridging
Wireless and Other Features
Frequency 2.4GHz
Wireless Speed 300Mbps.
Output Power 1000mW
Wireless Security 64/128bit WEP, WPA-PSK, WPA2-PSK, WPA/WPA2
Operating Modes Wireless AP
Other Functions and Features
„
Remote Web Management
„
System Logging
„
Backup & Restore Configurations
„
VLAN/Guest Network Support
„
Support for Setup on iOS and
Android Devices
„
QoS Support
„
Up to 8 SSIDs
„
Firmware Upgradeable via Browser
Certifications CE, FCC, RoHS