Luxul XAP-1230 - Manual (Page 16)

16
XAP-1230
a: 14203 Minuteman Drive, Suite 201, Draper, UT 84020-1685 | luxul.com | 801-822-5450
LUX-UG-XAP-1230 Vers: 07314
„
Wireless Mode: Sets the type of 802.11 wireless network to be broadcast.
Available modes are:
w
11g (802.11g)
w
11n+g (802.11g/n with 20MHz or 40MHz channels)
The default setting is 11n+g, and is recommended to allow all types of devices to con-
nect to the network. Use the 11g Mode ONLY if there are 802.11b/g client devices in the
network that will not connect in 11n+g Mode.
„
Channel Width: Sets the width of the 802.11n channel. Available widths are:
w
20MHz (available for both modes)
w
20/40MHz Auto (only available for 11n+g mode)
The default (and recommended) setting is 20MHz to provide maximum performance
to all client devices and to avoid any potential client issues.
„
Channel: This field allows the user to set which 2.4GHz channel to use. For 2.4GHz,
the default is set to Channel 6 and is the recommended setting however any other
channel (1-11) may be selected. To change the Channel, click the dropdown menu,
select the desired channel, then click Save and then Reboot for the change
to take effect.
NOTE: 11g+n 40MHZ mode will use two channels. For example, if radio is
using channel 6, it would also use channel 10.