Lingenfelter L460095297 Lingenfelter LNC-002 Launch Controller v2.0 - Manual (Page 17)

Page 16 of 17
• Vehicle applications:
The LNC-002 is designed for use on all known GM LS series engine applications (LS1, LS6, LS2, LS7,
LS3, LQ4, L76, L92 and other Gen III and IV GM V8 applications along with other GM V8 engines
using the same ignition coil system) including the following vehicles:
• 1997-2004 C5 Corvette
• 2005-2009 C6 Corvette (including Z06)
• 1998-2002 LS1 V8 equipped Camaro and Firebird
• 2004-2006 Pontiac GTO
• 2008-2009 Pontiac G8 with the L76 or the LS3 engine
• 2004-2006 Cadillac CTS-V
• 1999-2008 GM CK trucks (Tahoe, Yukon, Escalade, H2, Sierra, Silverado, Avalanche) with the 4.8, 5.3, 6.0 and
6.2L Gen III and IV V8 engines (will not work on 305 & 350 Vortec engines)
• 2003-2006 Chevrolet SSR
• 2006-2008 Trailblazer SS and other S/T body trucks with the 4.8, 5.3 and 6.0L Gen III & IV GM V8 engines
The LNC-002 should function on the following vehicles/engines but has not yet been tested on them:
• CK trucks with 8.1L V8 engines (L19) with individual coil ignitions
• front wheel drive 5.3L LS4 Gen IV V8 equipped cars (Impala SS, Grand Prix & Monte Carlo)
The LNC-002 should also function with these products but has not yet been tested with them:
• aftermarket coils for the LS series engines (such as the MSD coils) used with GM ECM/PCM.
• aftermarket engine management systems and ignition systems (Accel, BigStuff3, Motec, FAST, MSD, etc.) that run
the production GM coils.
The LNC-002 can be used on the 2009-2010 ZR1 Corvette (LS9 engine) and the 2009-2010 Cadillac
CTSV (LSA engine) but you will need to change the connectors because the LS9 and the LSA use a
different combined coil and fuel injector harness. Contact LPE for these connectors (part #s 15336037,
15422562, 15326939, 15336034).
The LNC-002 will NOT work with other individual coil ignition systems like those found on the GM
Northstar or Ecotec engines or on the Ford modular V8 and the Chrylser Hemi V8.