beautypg.com

Automatic transmission with linelock – Lingenfelter L460095297 Lingenfelter LNC-002 Launch Controller v2.0 User Manual

Page 13

background image

Page 12 of 17

Momentary Switch MUST be capable of supplying current

draw of Linelock Solenoid. If switch is rated at a lower amperage

then the solenoid, a Relay MUST be used. See Diagram for

Manaul Transmission installation for Relay wiring details.

Optional LED, On when

Arming Switch is ON.

Automatic Transmission with Linelock

Retard Activation Connect to Nitrous
WOT switch signal or to +12V output
from Nitrous controller.

Analog Output
0-3 volt, .2 volt per 1* of Retard
Connect to analog input of Data
Recorder.

A

B

C

+12V

Toggle Switch

Ground

Momentary

Switch

Ground

Linelock

Solenoid

(Arms 2-Step and Linelock)

Fuse

20 Amp

When the LNC-002 is powered up with no
MAP Sensor installed it will default to
Time Based Retard mode.