Lingenfelter L500151410 Lingenfelter - Pedders Camaro SS Coil Over Shocks - Manual (Page 21)

www.PeddersUSA.com
248.522.8021
Camaro FE4 / FE5 Alignment Specifications
OEM specifications reflect the best available information at time of print
The final step in your Xa coilover installation is a tight spec Pedders alignment. We could make our parts out of
unobtainium and without a tight spec Pedders alignment they would not perform as well as they should. Talk to
your alignment shop manager and make certain they understand exactly what you expect of them.
NOTES:
•
The Road Course Alignment Specifications will cause rapid tire wear, but your car will turn in yesterday
•
Caster adjustment requires Pedders Caster Eccentrics # PDUSACAMCASTER
• Lowered Camaros require Pedders Camber Eccentrics to adjust to -.5 or less # PDUSACAMREAR
• Lowered Camaros require Pedders Full Alignment kit to reach Road Course Specifications # PDUSACAMFULL
OEM
FE4
OEM
FE5
ZL1
PEDDERS
Aggressive
Street
PEDDERS
Road
Course
PEDDERS
Strip
Front Camber -.8 -1 -1.25 -2.5 -.2
Cross Camber Tolerance +/- .75 .75 .2 .2 .2
Front Caster: Max out the
adjustment, even side to side
5.9 5.6 8.0 8.0 8.0
Cross Caster Tolerance +/- .75 .75 .4 .4 .4
Front Total Toe .20 .20 0.00 -1.00 0.00
Total Toe Tolerance +/- .20 .20 .04 .02 .04
Rear Camber -.4 -.5 -1.0 -2.5 0.0
Cross Camber Tolerance +/- .75 .75 .3 .2 .2
Rear Total Toe:
Reduce Total Toe
to .10 and .12 with Full Pedders bushes
.20 .20 .20 .20 .24
Total Toe Tolerance +/- . 20 . 20 .04 .04 .04
Rear Thrust Angle +/- .3 .3 0 0 0