Camaro 160086 xa coilovers – Lingenfelter L500151410 Lingenfelter - Pedders Camaro SS Coil Over Shocks User Manual

Page 13

www.PeddersUSA.com

248.522.8021

Camaro 160086

Xa Coilovers

11.

Install the top shaft with spacer and washer into the top mount

then fit upper side mount washer in the correct direction and new included

nyloc nut and tighten top mount

**NOTE** Ensure that adjuster is correctly aligned with flexible extension

while tightening top mount assembly and the cable is exactly at 90 degrees

and not kinked in any way. Tighten the top strut nut until is it tight using a

wrench to hold the shock and another wrench to turn the nut.

DO NOT USE AN

IMPACT GUN OR ANY KIND OF AIR TOOL. INSTANT DAMAGE WILL OCCUR AND

WILL NOT BE COVERED BY WARRANTY

Attaching the cable to the

strut know on the side can

be done without

disassembling the strut.

But it is challenging to get

the Allen screw inside and

tightened correctly. So to

make it easier, we will take

maybe 5 minutes and

disassemble the spring,

spring seats

and lower mount from

shock, leaving only shock

body, shaft and boot.

10.

Assemble the spacer and

underside mount washer

to the top of the strut

shaft as pictured on the

left.