beautypg.com

Lingenfelter L320030709 Lingenfelter CTS-V Intercooler Radiator Kit 2009-13 v1.1 User Manual

Page 24

background image

Page 23

77. Insert one end of each of the two supplied

brass barbed unions (PN: LN-TT23) into the

ends of the power steering hoses that are

attached to the power steering cooler.

78. Slide one piece of the supplied shrink tubing

over each hose section and then install one

17mm Oetiker clamp (PN: 52545K55) onto

each of the hoses. Use the Oetiker pliers to

secure the brass barbs into place.

79. Connect the OEM power steering hoses,

from the rack and P/S pump, to the brass

barbs. Using a pair of hose clamp pliers,

release the tension from clamps and slide

the hose and clamps into place. These

clamps are attached to the hose and cannot

be moved or rotated.

Use a heat gun to secure the heat shrink

tubing to the loom and hose as before.

80. Now route the fan harness inside the engine

compartment to the driver side of the fuse

block and windshield wiper fluid bottle fill

neck.