Lingenfelter L320030709 Lingenfelter CTS-V Intercooler Radiator Kit 2009-13 v1.1 - Manual (Page 19)

Page 18
57. Locate the two brackets (PN: XX03277-
0009) and the supplied power steering
cooler (PN: SET50-910-7612). The bolt
holes on the brackets are offset, with the
holes being closer to one edge. Be sure
to position the brackets such that the side
of the bracket with the holes closest to the
edge is next to the cooler (as shown).
58. Attach the brackets to the cooler using
the four (4) 1/4-20 Nylon insert lock nuts
and 1/4-20x3/4” button head cap screws
supplied with this kit. Using a 5/32” Allen
wrench and 7/16” socket, tighten the bolts to
6 lb-ft (8 Nm).
NOTE: The brackets attach to the flanges
on the bottom of the heat exchanger next to
the hose fittings.
59. Place the power steering cooler in between
the diagonal support braces on the front of
the core support with the mounting brackets
setting on top of the front bumper impact
bar.
The power steering cooler may not fit
completely between the diagonal support
braces. You will address that in the following
steps.
60. Find the three relays in the fan harness
that you placed behind the passenger side
support brace. Mark the positions on the
back side of the brace where the relays
should be mounted (leaving room for the
OEM Christmas tree fasteners).