Lingenfelter L320030709 Lingenfelter CTS-V Intercooler Radiator Kit 2009-13 v1.1 - Manual (Page 12)

Page 11
29. Remove the intercooler radiator and center
punch the hole locations you marked in the
previous step. Drill the four (4) mounting
holes using the supplied #2 carbide drill bit.
30. Hold the intercooler radiator back up into
place and attach it to the vehicle using the
four (4) supplied 1/4-20x3/4” thread forming
screws (PN: 1132408). Tighten the screws
in place using a 3/8” socket and wrench .
Torque to 5 lb-ft (7 Nm).
31. Using a 3/4” wrench, install the coolant
temperature sensor (PN: 12608814) into
the top rear hole on the driver’s side of the
intercooler radiator. Tighten to 14 lb-ft (20
Nm).
32. Apply a light coating of oil or o-ring safe
assembly lubricant to the threads of the 3/4”
push to lock 90 degree fittings (PN: SET22-
M22PL1290). Install the two fittings into the
intercooler radiator.