Lab.gruppen PLM 20000Q - Manual (Page 58)

52
Front Panel Interface
PLM Series Operation Manual rev 1.2.3
7.11.3 Input Config Submenu
MENU > INPUT CONFIG
Figure 7-12: Input Config Submenu
This menu provides configuration options for input routing, along with settings for AES Termination and
Iso-Float as described in the following sections.
7.11.3.1 Router 1 / 2
MENU > I/O CONFIG > ROUTER 1 / 2
Figure 7-13: Input Router 1
Figure 6-1 on page 26 shows that there are two Input Routers available on PLM Series devices. The input that
is selected within the router can be used by the input mixer for either Module A or Module B.
Each router has four priority levels allowing any input to be placed in a sequence providing automatic input
signal fail over. AES3 and Dante inputs have priority over analog inputs.