Konig Electronic Indoor pan-tilt IP camera remote video surveillance - Manual (Page 12)

ENGLISH
12
Typical scenario will be that the uCare Cam is installed at home or in the office and the
Smartphone has a 3G/3.5G/4G internet connection. Typical frame rate will be around VGA
640x480 10~15fps.
3) Relay Mode
uCare Cam and Smartphone cannot establish a point to point network connection link.
uCare Cam must send Audio/Video data to a Relay Server and the Smartphone will retrieve
data from the Relay server. In Relay mode, there will be a limit on the Video download
frame rate.
Typical scenario will be that the uCare Cam is installed at home or in the office and the
Smartphone is using a WiFi connection.
Remark:
• When using 3G/3.5G/4G to connect to uCare Cam, the APP will use P2P mode. If the
Smartphone download speed is too slow, the APP will switch to Relay mode. The user
can force the APP to reconnect to uCare Cam and it will try P2P mode again. To force
reconnect, press and hold the camera name on Camera list. A pop-up menu will appear
with the option to “Reconnect”. Please click “Reconnect”.
I. Using the uCare Cam APP
The uCare Cam has a lot of functions possible through the Smartphone APP. Please see below
for some of the key functions.
Camera List
Add Camera that has
already setup WiFi
Edit Camera Info
Camera On-Line