HITEC H4: DC/DC, Four-Port Multi-Charger - Manual (Page 20)

20
Hitec
Instruction Manual
$CVVGT[5VQTCIG/QFG
It is recommended that Lithium batteries are charged at a certain capacity if you plan to store them for a long period of time. The H4 charger's storage charge mode
provides the perfect battery capacity for storage.
Move the cursor to ‘Storage Mode Start’ and press the ‘START’
button for 1 second. The H4 will begin to check your battery condition
automatically.
After the H4 checks your battery, the 'Storage Mode' process
will begin. Depending upon the condition of your battery, the
H4 will select charge or discharge automatically until it reaches
the desired capacity.
'Storage Mode' setup is the same as
charging or discharging your battery with the
default settings. Make sure you set up the
‘Storage Mode’ according to your
battery manufacturers recommendations.
Storage Mode is operated independently on
all 4 channels.
1Sec.
5WTXGKNNCPEG/QPKVQT5ETGGP
The H4 can display each of the 4 channel’s information at the same time. Displayed are each battery's voltage, charge Amperage and charge/discharge status.
or