beautypg.com

Fly high with hitec – HITEC Sky Scout (KIT) User Manual

Page 26

background image

26

Fly high with Hitec

Control Surface Movements with Mode 1 Transmitters and Optional Ailerons

Now, it’s time to check the throttle or motor control. Be extremely careful to avoid contact with the propeller. Move the right stick up just enough to con-

firm that the propeller rotates. If the propeller spins when the stick is moved down, use the REV (reverse) function to change the throttle input direction.

Finally, check the rudder movement. This control causes the nose of the model to “yaw” or move left and right in a horizontal direction. Confirm that

the rudder moves to the right when moving the left transmitter stick to the right as shown. If the rudder moves to the left, use your transmitter’s REV

(reverse) function to change the rudder direction.

Control surface movements with Mode 2 transmitters (US Standard) and optional ailerons

First, check the aileron control, which “rolls” or banks the wings to the left and right. Move the right stick to the right as shown and confirm the left

aileron goes down and the right aileron goes up when viewing the Sky Scout from behind. If the left aileron moves up and the right down, use your

transmitter’s REV (reverse) function to change the aileron direction.

Link

V-TAIL

OFF

ELEVON

CH1C H2 CH3C H4

REV

NOR

2.4GHz 4 Channel Aircraft Radi o

Link

V-TAIL

OFF

ELEVON

CH1C H2 CH3C H4

REV

NOR

2.4GHz 4 Channel Aircraft Radi o

Control surface movements with Mode 2 transmitters (US Standard) and optional ailerons

Link

V-TAIL

OFF

ELEVON

CH1C H2 CH3C H4

REV

NOR

2.4GHz 4 Channel Aircraft Radi o