HITEC Sky Scout (KIT) - Manual (Page 24)

24
Fly high with Hitec
Appendix B: Transmitter Control Surface Movements
First, check the rudder movement. This control causes the nose of the model to “yaw” or move left and right in a horizontal direction. Confirm that the
rudder moves to the right when moving the right transmitter stick to the right as shown. If the rudder moves to the left, use your transmitter’s REV
(reverse) function to change the rudder direction.
Link V-TAIL OFF
ELEVON CH1C H2 CH3C H4 REV
NOR
2.4GHz 4 Channel Aircraft Radi o
Next, check the elevator movement. This control “pitches” the nose of the model up and down. Move the right stick down as shown and confirm the
elevator goes up. If the elevator goes down, use your transmitter’s REV (reverse) function to change the elevator direction.
Link V-TAIL OFF ELEVON CH1C H2 CH3C H4
REV
NOR
2.4GHz 4 Channel Aircraft Radi o
Now, it’s time to check the throttle or motor control. Be extremely careful to avoid contact with the propeller. Move the left stick up just enough to confirm
that the propeller rotates. If the propeller spins when the stick is moved down, use the REV (reverse) function to change the throttle input direction.
Link V-TAIL OFF
ELEVON CH1C H2 CH3C H4 REV
NOR
2.4GHz 4 Channel Aircraft Radi o