Heath Consultants Personal Surveyor (PS200 Series) - Manual (Page 30)

2-6
USER HANDBOOK
2.2.6 Bump Due Date (Option)
This configurable option is disabled by default but can be
configured to either, indicate briefly that bump test is due, as
illustrated in Fig. 2-6, indicate that bump test is overdue then
pause awaiting user acceptance, as illustrated in Fig. 2-7,
or force the user to switch instrument OFF when overdue.
Fig. 2-6 Bump Due Date
Fig. 2-7 Bump Overdue
To continue instrument operation, press the Right Hand (RH)
button once to acknowledge bump test is overdue.
To abort the warm-up routine and automatically switch the
instrument OFF, press the Left Hand (LH) button once.