Hanna Instruments HI 2550 - Manual (Page 11)

11
TDS MEASUREMENTS TDS MEASUREMENTS TDS MEASUREMENTS TDS MEASUREMENTS TDS MEASUREMENTS
Press the ALT&MODE keys while in EC range. The instrument will switch
to TDS measuring range. The TDS reading will be displayed on the
primary LCD and the temperature reading on the secondary LCD.
• If the reading is out of range, the full-scale value (100.0 for MTC/ATC
mode or 400.0 for uncompensated TDS) will be displayed blinking.
• If LOCK was pressed and the reading goes out of range, the full-scale
value of the frozen range will be displayed blinking.
NaCl MEASUREMENTS NaCl MEASUREMENTS NaCl MEASUREMENTS NaCl MEASUREMENTS NaCl MEASUREMENTS
Press the ALT&MODE keys while in EC range until NaCl is displayed on
the LCD. The instrument will display the NaCl reading on the primary LCD
and the temperature reading on the secondary LCD line.
• If the reading is out of range, the full-scale value (400.0%) will be
displayed blinking.
TEMPERATURE MEASUREMENTS TEMPERATURE MEASUREMENTS TEMPERATURE MEASUREMENTS TEMPERATURE MEASUREMENTS TEMPERATURE MEASUREMENTS
In pH and ORP mode, connect the HI 7662 temperature probe to the
appropriate socket.
Submerse the temperature probe into the sample and allow the reading
on the secondary LCD to stabilize.
In EC/TDS/NaCl range, the HI 76310 probe has a built-in temperature
sensor.