Hanna Instruments HI 83216-01 - Manual (Page 16)

16
DATA MANAGEMENT
The instrument features a data log function to help you keep track of all your analysis. The data log can
hold 200 individual measurements. Storing, viewing and deleting the data is possible using the LOG
and RCL keys.....
Storing data: You can store only a valid measurement. Press LOG and the last valid measurement will be
stored with date and time stamps.
Viewing and deleting: You can view and delete the data log by pressing the RCL key. You can only delete
the last saved measurement. Additionally, you can delete the data records all at once.
CHEMICAL FORM
Chemical form conversion factors are pre-programmed into the instrument and are method specific. In order
to view the displayed result in the desired chemical form press or to access the second level functions
and then press the Chem Frm functional key to toggle between the available chemical forms for the
selected method.
SPECIAL CONVERSIONS
For Calcium Hardness, special conversion factors can be used to convert the readings from mg/L to French
degrees (°f), German degrees (°dH) and English degrees (°E) of hardness. This can be achieved by pressing
or to access the second level functions and then press the Unit functional key to toggle between
°f, °dH, °E and mg/L.
• After the desired method is selected, follow the measurement described in the related section.
• Before performing a test you should read all the instructions carefully.