Hanna Instruments HI 8711 - Manual (Page 47)

47
HANNA instruments reserves the right to modify the design, construction and
appearance of its products without advance notice.
HI 778P Coaxial cable and connectors for screw-type electrodes
HI 8427 pH/ORP electrode simulator with 1 m (3.3')
coaxial cable ending with female BNC connectors
(HI 7858/1)
HI 931001 pH/ ORP electrode simulator with display and 1 m
(3.3') coaxial cable ending with female BNC
connectors (HI 7858/1)
RECOMMENDATIONS FOR USERS
Before using these products, make sure they are entirely suitable for
the environment in which they are used.
Operation of these instruments in residential areas could cause
unacceptable interferences to radio and TV equipment, requiring the
operator to follow all necessary steps to correct interferences.
The trimmers are sensitive to electrostatic discharges. It is recommended
to use antistatic screwdrivers.
Any variation introduced by the user to the supplied equipment may
degrade the instruments’ EMC performance.
To avoid electrical shock, do not use these instruments when voltages
at the measurement surface exceed 24 VAC or 60 VDC.
To avoid damage or burns, do not perform any measurement in
microwave ovens.