Hanna Instruments HI 8711 - Manual (Page 25)

25
SET POINTS (HI 8711)
To set the working point for alkaline dosage, press the ALK. SET key and
the display will show the set value for alkaline dosage. The ALK. SET LED
will turn ON if alkaline dosage is deactivated or change blinking style.
Using a small screwdriver adjust the ALK. SET COARSE and FINE
trimmers to display the desired base set value.
To set the working point for acid dosage, press the ACID SET key and
the display will show the set value for acid dosage. The ACID SET LED
will turn ON if acid dosage is deactivated or change blinking style.
Using a small screwdriver adjust the ACID SET COARSE and FINE
trimmers to display the desired acid set value.
Using a small screwdriver adjust the COARSE and FINE trimmers to
display the desired set value.