Hanna Instruments HI9126 - Manual (Page 9)

16 17
The instrument allows the user to configure several parameters
through the Setup Menu.
To enter the Setup Menu, while in measurement mode, press and
hold the SETUP key for about 5 seconds.
Once the menu is entered, each parameter can be changed by using
the arrow keys; then pressing the CFM key will confirm the value and
scroll to the next parameter.
1. Audible signal: On (default) or Off
2. Auto-off feature: 20 minutes (default) or disabled
3. Temperature measure unit: ºC (default) or ºF
S E T U P M E N U S E T U P M E N U S E T U P M E N U S E T U P M E N U S E T U P M E N U
4. Calibration segments: On (default) or Off. This enables or disables
the bargraph, the “CLEAN ELECTRODE” message and the buffer
segments.
5. Calibration time-out: 1 (default) to 14 days or disabled (0 days)
After the last parameter, press the CFM key to confirm the setting
and return to measurement mode.