Hanna Instruments HI847492 - Manual (Page 21)

21
SET UNIT
The measure unit can be set between FTU, HELM,
ASBC and EBC.
• To set a new measure unit, press CAL/RCL when
the unit panel is displayed.
The parameter setting and “CFM” tag will start
blinking.
• Press the UP or DOWN keys to select the measure
unit.
• Press LOG/CFM to save the change. The new
selected option of the parameter will be
displayed on the LCD.
Alternatively, press CAL to exit without saving
the changes.
SET BEEPER
The HI 847492 has a built-in beeper that signals
the tag read, the key press and the error conditions.
The beeper can be selected to be on or off.
• To set the beeper on or off, press CAL/RCL when
set beeper panel is displayed.
The beeper status and the CFM tag will start
blinking.
• Press the UP or DOWN keys to set the beeper on
or off.
• Press LOG/CFM to save the change. The new
selected option will be displayed on the LCD.
Alternatively, press CAL to exit without saving
the changes.