Hanna Instruments HI847492 - Manual (Page 17)

17
• If less than ten free records are available, the
“LOG” tag will blink while storing data.
• If the log memory is full, the “LoG FULL” message
will appear for a few seconds on the LCD and the
instrument will return to measurement mode
without storing the new record.
To store a new record, delete one or more records.
VIEW LOGGED DATA
The stored records can be viewed by pressing
CAL/RCL key for a few seconds. To return to normal
measurement mode, press CAL/RCL key again .
LOG SEARCHING
The log records are stored in chronological order.
The first displayed record is the last stored one.
• Press UP or DOWN keys to scroll the log memory
record by record. By holding the UP or DOWN
keys, the scrolling speed will increase. The
scrolling of the log is possible from any panel
of the record, except “Delete last log” and
“Delete all logs” panels.
• When scrolling the log, the number of the record
is displayed for one second on the secondary
LCD together with “TAG” if the identification of
the sampling location was made.
When the end of the log is reached, an error beep
is heard.
RECORD VIEWING
Each record contains more information than the
measured value. The additional information is
grouped in several panels.
Press READ to scroll through the record panels.
The record panels are displayed one by one in a
circular way.