Hanna Instruments HI 121 - Manual (Page 40)

40
• For ISE range:
When in SETUP mode, the following information can be printed:
• If 2nd then Print key are the first
keys pressed after entering SETUP
mode, a SETUP table of contents
will be printed:
• When exiting SETUP mode, the instrument asks if a SETUP REPORT
shall be print. The “Prn” message will be displayed on the LCD,
together with “ ” tag and “CFM” tag blinking.
INSTRUMENT SETUP
Ion Charge
Beep Alarms:
Alarm high
Alarm low
AutoLOG:
Start condition
End condition
Interval
Current Date
Current Time
Printing
Language
Printer ON/OFF
Beep ON/OFF
Baud rate
Command prefix
Instrument ID
Active Keys:
-next item
-prev. item
CAL-enter in
modifying mode
SET-exit SETUP
MODE-select
parameter
See also items
Help printings
GLP Ion
Instr ID 0002
Date 2004/10/15
Time 14:25:05
Slope -59.3
Ion Charge 1
Cal Buffers
ppm 0.1
mV -312.8
ppm 100
mV -134.8