Hanna Instruments HI 4221 - Manual (Page 32)

32
mV mV mV mV mV SETUP SETUP SETUP SETUP SETUP
The mV Setup menu allows the user to set the parameters associated with mV and Relative mV
measurements. These parameters can be set specifically for each channel (HI 4222 only). The settings will
be applied only to the active channel.
Accessing mV Setup
• Press
while in Measure mode and then or
to select mV / mV Rel range for the desired channel.
• Press and then to access mV Setup menu.
To access a mV Setup option:
• Use
or to highlight the desired option.
• Press to access the selected option.
The following is a detailed description of the mV Setup option
screens.
Temperature – See pH Setup section, page 20.
Note: To access mV Setup, press
and then .
Sample ID – See pH Setup section, page 20.
Stability Criteria – See pH Setup section, page 20.
Reading Mode – See pH Setup section, page 20.
Log – See pH Setup section, page 20.
Alarm – See pH Setup section, page 20.
Note: The Alarm Limits (Low and High) are set in mV units.