Hall Research VSA-32 - Manual (Page 6)

Model VSA-32
4
2.0 Features
9 User interface control panel available as 2-gang wallplate or desktop standalone
keypad
9 Wall plates available in black color
9 Programmable relay contacts can switch on or off with any button
9 Accepts 1 VGA and 1 TV-Video (Composite or S-Video) each with its own stereo
audio
9 Accepts 1 Cat5 A/V signal from a compatible UVA sender
9 Accepts microphone input (with phantom power and microphone preamplifier with
programmable gain) on XLR connector or rear 3 pin header
9 Selectable volume control and mute button for the AV and Microphone audio
9 Provides individual buttons for turning the projector on/off, selection of the video
source, both volume control and mute selection and a user definable button
9 Bidirectional RS232 connection from the control wallplate to the receiver
9 Sends selected AV to a remote receiver unit via 2 Cat5 Cables
9 No power supply is needed for the user interface wallplate or connector panel, only
at the receiver
9 (1) N.O. and (1) N.C) relay contacts available for external control circuits
9 Simple UTP (CAT5) cable connections between the wall plates and the receiver
9 Remote unit can be up to 750 ft away with automatic video compensation
9 Built-in 20 Watt (10x2) Stereo Amp drives 4 or 8 ohm speakers directly
9 Automatically controls projector operation (on/off and source selection) via serial
commands stored in the unit
9 Comes with Windows™ GUI software and cable for programming
9 Supports 1200, 2400, 4800, 9600, 14400, 38400, 57600 and 115200 Baud Rates
9 Supports Parity of NONE, EVEN or ODD