Hall Research VSA-32 - Manual (Page 11)

A / V Switch-Cat TM
9
5.0 Windows™ Projector Configuration Software
Included in the VSA-32 package is a CD with the application that you need to use
to select your projector model in order to upload the configuration serial
parameters. This is a one time task, as long as you do not change your projector.
You can also create your own command string set as explained below.
. Installing the Software
To install the software, load the CD into your PC and double-click on the
setup.exe file on the CD. The installation wizard will walk you through the rest of
the installation. After installation, note that the version number of the software is
displayed on the main screen.
NOTE: The software GUI is titled with VSA-31, but it is completely
compatible with the VSA-32.
. Selecting the Com Port
The VSA-31-SP Programming Software will detect your available COM ports. Just
select the COM port you will use to connect the VSA-32 to your PC
. Selecting your Projector Configuration file
Select your projector model from the drop down list. If your projector model is not
listed, the Request button lists the information you should provide Hall Research
to obtain assistance in creating your projector configuration file. You may also
enter the projector codes in a new configuration file if you would prefer.