Hall Research VSA-32 - Manual (Page 17)

A / V Switch-Cat TM
15
. Resetting the VSA-32
If for any reason you need to reset the VSA-32, press and release source buttons
1 and 3 simultaneously and the unit will reset. This will not result in the loss of any
serial command programming; this will only reboot the unit. All the serial
commands are still stored in the unit. You will need to press the power on button
and reselect the input you wish to display.
6.0 Troubleshooting
Make sure that all your connections are solid, and check the state of the LED’s on
the User Interface control panel. Do not open or try to repair the unit yourself.
There are no customer repairable items in the unit and you will void your warranty.
Contact HR Support at 714-641-6607 or via email or web. If you need to ship your
unit back for repair, make sure to get a Return Material Authorization (RMA)
number from Hall Research first.