Hall Research TVB-350 - Manual (Page 8)

Model TVB-350
6
3. Configuration & Operation
3.1 Front Panel
1 1 . .
Source / Mode:
Press the button repeatedly will toggle through
the following adjustment controls:
Source > Resolution > Output > Aspect > 3D Enhance > Digital NR
Source: While under this mode, press Зor И buttons to choose
your desired input source from Composite Video, S-Video, or
Component Video inputs. Note: To select the PC input from the
front panel turn the unit off. The TVB-350 has a Power off bypass
from the PC input to the VGA output. However, if you don’t want
to turn the unit off to get the PC pass-thru, you can select the PC
input (with the unit on) from the IR remote or the Serial Input
(please see following sections).
Resolution mode: If output is set to RGB (PC-type), press Ç or È
buttons to choose from 640 x 480(VGA), 800 x 600 (SVGA), 1024
x 768(XGA), or 1280 x 1024(SXGA) PC output. If output is set to
YPbPr press Ç or È to choose from 480p, 576p, 720P or 1080i
HDTV output.
Output mode: Press Ç or È to select between PC RGB output or
HDTV YPbPr output.
Aspect mode: Press Ç or È to choose between standard (4:3)
aspect and wide (16:9) aspect ratio.
3D Enhance mode: To turn on or off the 3D comb filter function.
Figure 3.1
1 2 3 4 5