Hall Research CC-101-PRO - Manual (Page 6)

Model CC-101 & CC-101-PRO
6
. Connecting the CC-101
Connect your video source (S-Video or Composite Video) to the CC-101
and select the source by pressing the “Input select” button on the front
panel. If the selected input does not have valid video, then the
corresponding LED on the front panel will be blinking.
On the –PRO unit connect the video output to your display device using
either a VGA cable or the supplied HD15 to Component cable. If you
have a –PRO unit, the front panel PRO OUTPUT will be lit.
Connect the included power supply to the CC-101-PRO and apply power
(do not substitute power supplies, inputs over 5.5 VDC cause damage).
For programming the unit’s internal memory with your own text or for
streaming ASCII data to the unit, Connect the supplied DB9 RS-232
Serial cable to your PC and the CC-101 or CC-101-PRO.
. Rack Mounting the CC-101
The CC-101 has threaded holes on the bottom that allows 3 of them to be
installed on a Hall Research 1U rack mount shelf (Model RMS-1U-1A)