Hall Research CC-101-PRO - Manual (Page 10)

Model CC-101 & CC-101-PRO
10
. . Selecting the Com Port
The Programming Software will detect your available COM ports. Just
select the COM port you will use to connect the CC-101(-PRO) to your
PC.
. . How to insert Text Overlay Commands
Select the command from the “Command to Insert” drop down menu
Depending on the command selected, a parameter may be needed. If a
parameter is needed you will need to specify a value in the Command
Parameter text box.
After you have entered a valid parameter, the Insert Command Button
will show up and be available. Click on this button and the command will
be inserted into the selected string at the current position.
. . Inserting Hex Bytes
Enter a 1 byte hexadecimal value into the Hexadecimal text box then click
the Insert Hex Byte button and your hex byte will be inserted into the
selected string at the current position.