Hall Research CC-101-PRO - Manual (Page 19)

Closed Caption & Text on Video Overlay
19
Wait Frames: This is essentially a small timer. This will wait for a
specified number of video frames. The number frames to wait can range
from 1 to 65 frames. There are 30 frames per second. This is 33.3 ms per
frame.
The “Wait Frames” command is an exclusive wait. During this time, the
CC-101(-PRO) will be unresponsive to any button press or Serial
communication. Use it sparingly!
Flash ON: Starting with the current Cursor Position, all the characters
display until the end of the row will be flashing. The next row will
automatically turn off the flashing off.
Flash OFF: This will stop the flashing of characters from the current
position to the end of the row.
No Background: Will make the entire Text Overlay have a no
background.
Space with no Background: Will print a space with no background.
Black Characters: Will print black characters.
Black Underlined Characters: Will print black underlined characters.
White Characters: Will print white characters.
White Underlined Characters: Will print white underlined characters.
Set CC Alt Mode: Will choose the CC mode to be used for the CC
Alternate selection. The values can be [2-4] 2 = CC2, 3 = CC3, 4 = CC4
Brightness: Set the brightness of the scaled video outputs. The brightness
value can be in the range [0-255]
Contrast: Set the contrast of the scaled video outputs. The contrast value
can be in the range [0-255]
Show Stored Strings on Power: Display the stored strings immediately on
power-up.
Don’t Show Stored Strings on Power: Don’t display the stored strings on
power-up.