Hall Research UD2A-EDID-S - Manual (Page 4)

2
Model UD-2A-EDID
1.0 General
Thank you for purchasing Hall Research’s UD2A-EDID. This is a
versatile, high performance DVI extender with EDID management.
This unit has the capability to read the EDID (Extended Display
IDentification) information from the device connected to either the DVI
output connector or the receiver connected to the UTP output. This
information can be stored in the UD2A-EDID-S memory in the “Emulate
Learned” setting, which allows the unit to act like an actual monitor
connected to the INPUT DVI connector.
The UD2A-EDID-S has local DVI and remote UTP video and audio
outputs. Its video outputs can be blanked out or boosted when needed.
This unit can drive video, audio, and RS-232 up to 300 feet depending on
the video resolution being displayed.
This unit can be controlled by either manually using the buttons on the
front panel or remotely through a serial port with RS232 commands or
GUI software.
The unit also has internal memory to store the last operating selection
when power is off. The unit allows four different EDID settings to be
routed to the video input device.
2.0 Features
9 Read and store EDID information
9 Allows EDID information downloaded from PC using GUI software
9 EDID information learned from an output device can be used to
emulate that actual device
9 Multiple control methods including front panel, serial commands, or
GUI software
9 Video outputs can be blanked and un-blanked
9 Stores the last selection in internal memory
9 Can drive video, audio, and bi-directional RS232 over long cables
9 Ships with serial control terminal adapter
9 Compact, Rugged, Reliable, and Economical
9 Made in USA