Hall Research UD2A-EDID-S - Manual (Page 11)

DVI Extender with EDID, Audio & Serial Control
9
4.2.2.6 Blank output:
To blank the video output.
Co m m a n d ........................................... R e sp o n se
ASCII b or B (Hex 62 or 42) ................Blank output (1=DVI – 2=UTP)
ASCII 1 (or Hex 31) ............................................................DVI blanked
ASCII 2 (or Hex 32) ........................................................... UTP blanked
4.2.2.7 Un-blank output:
To un-blank the video output
Co m m a n d ........................................... R e sp o n se
ASCII u or U (Hex 75 or 55).......... Un-blank output (1=DVI – 2=UTP)
ASCII 1 (or Hex 31) ...................................................... DVI un-blanked
ASCII 2 (or Hex 32) ......................................................UTP un-blanked
4.2.2.8 Get status report:
Display the unit’s status report including the current EDID Routing,
output boost setting and the video output blank/un-blank status.
Co m m a n d ..........................................................
ASCII s or S (Hex 73 or 53)....................................................................
R e sp o n se
Status Report
--------------------------
EDID Routing = DVI-Local (or UTP-Remote)
DVI Boost = Disabled (or Enabled)
UTP Boost = Enabled (or Disabled)
DVI Blank = off (or On)
UTP Blank = off (or On)