Hall Research U97-Ultra-2B-S - Manual (Page 8)

Console Extender
9
USB Port & Connector Types
2. Installation
2.1 Connecting the Sender to the PC
Using the supplied cables; connect the sender to the PC.
Close-up of Sender Input Connections
Close-up of Sender UTP Connections
Connect PC’s VGA outputs to VGA A IN and VGA B IN connectors using the supplied
cables.
Connect the audio source to AUDIO connector using either the DB15 connector for
amplified audio, or 3.5mm for line-level audio. To connect to the amplified audio a DB15
male-to-female cable is needed (not provided). Do not simultaneously connect both
Audio inputs.
DB15 Pin Function Notes
12 & 13 Amplified audio input. These pins are tied together, max input 10 Vp-p
4 & 5 Audio Return These pins are tied together
If a serial communication is needed, connect a PC’s serial port to RS232, a DB9 female
connector. Usually a straight-thru DB9 M/F cable is required (not supplied).
Use the included USB cables to connect the PC to
USB STD and DRx connectors. These are Type ‘B’
connectors, which are used to attach the USB cable
to a USB device.