Hall Research U97-Ultra-2B-S User Manual

Page 12

Console Extender

Test Pattern for HF Gain and Skew adjustments

Select the video channel that you are going to adjust (A or B).

Start by adjusting HF gain (hit Select button as needed to light all 3 LED’s on the

Receiver). It is best to start at the min compensation setting. To do this either press the

Down button repeatedly until the LED’s blink (indicates you are at min), or simply press

both Up and Down buttons simultaneously.

If the UTP cable is long then the black and white horizontal lines tend to appear smeared

(black smears as black, and white as white). Press the Up button one click at a time

paying particular attention just to the right of the horizontal lines. Your goal is to make the

transition between the horizontal black and white lines and the grey background to have

as little smear as possible. Do not over adjust. If you do, some smear comes back

particularly near the transition but in reverse sense (white lines smear as black and vice

versa). The following images depict the adjustment results as seen on the screen:

This manual is related to the following products: