Hall Research UV1-CV - Manual (Page 9)

ss Miniature VGA over CAT5 Extension System
7
IMPORTANT
Do not connect this unit to any LAN device such as network cards or
hubs as this may cause damage. Use EIA/TIA 568B standard straight-
through patch wiring as shown below. Do not use crossover cables.
EIA/TIA 568B WIRING STANDARD
PIN Wire Color
1 White w/ Orange Stripe
2 Orange
3
White w/Green Stripe
4 Blue
5
White w/Blue Stripe
6 Green
7
White w/Brown Stripe
8 Brown
3. Configuration & Operation
The Mini-Cat® Receivers are equipped with an adjustment to improve image
quality when using long cables. The adjustment is made via a single turn trim-pot
located next to the power connector on the receiver.