Hall Research UV1-CV - Manual (Page 6)

Miniature VGA over CAT5 Extension System
4
1.3 Model UV-1-CV (for Composite Video and Stereo
Audio)
This variation of the UV-1 includes cables for each end that allow you to connect
the sender to the composite Video (Yellow), Left Audio (White) and Right Audio
(Red) connectors of your A/V equipment. It can actually send the signals in excess
of 2000 feet (609 meters), though both ends need to be powered if the distance is
beyond 500 ft.
Unlike the UV-CP, the UV-1-CV is not compatible with VGA signals.
1.4 Features
• Eliminates the need for bulky, expensive and hard to build multi-coaxial
cables for High-Resolution A/V extension
• Amplifies the signal for clean and crisp transmission
• Differential signaling eliminates ground loops and noise
• Handles resolutions up to 1920x1440 at 60 Hz
• Rugged, Reliable, Compact size
• Only one end requires power in most applications. The power supply
connects at either the sending or the receiving end, whichever is most
convenient based on cable length.
• Drive standard CAT5 cables to 500 feet for (VGA and Component video
versions) or to 2000 feet for (Composite Video and Stereo Audio
version)
• Available with EDID Emulation, both Standard and Custom
Programming available