Recommended power supply connection – Hall Research UV1-CV User Manual
Page 8
Miniature VGA over CAT5 Extension System
6
Recommended Power Supply Connection
Cat 5 cable length of 0 to 150 feet:
It does not matter in which end you plug the power supply. Do whatever
is most convenient for your setup.
Cat 5 cable length of 150 to 300 feet:
We recommend that you plug the power supply at the receiving end.
Cat 5 cable length of 300 to 500 feet:
You should plug the power supply at the receiving end, however,
depending the grounding of the video source (PC) and the display
device at the remote end, you may need to purchase an additional
power supply to power up both ends.
Cat 5 cable lengths over 500 feet:
Purchasing an additional power supply to power up both ends is almost
certainly required.
3. Using Category-5 cable connect the UV1-Receiver to the unit's RJ45 output.
Connect the remote monitor to the receiver.